News & Press
Green Hills Software to Present and Exhibit at
ARM TechCon3 2009
SANTA BARBARA, CA—October 13, 2009 — Green Hills
Software, Inc., the largest independent vendor of embedded software solutions,
will speak at the ARM TechCon3 conference in Santa Clara, CA, October
21 - 23, 2009. At booth #319 in the Santa Clara Convention Center, Green
Hills Software will also demonstrate its latest embedded software solutions.
Green Hills Software will present:
Secure Virtualization
under the ARM Architecture |
When: |
Wednesday, October 21, 2009 4:00pm — 4:45pm |
Where: |
Santa Clara Convention Center, MCU & Tools track,
Room 209 |
Who: |
Dan Hettena, Sr. Architect RTOS |
Synopsis: |
With the need for secure virtualization on ARM platforms
becoming more urgent, this session will investigate some relevant
use cases for secure virtualization technology in an ARM context.
Following it will be an introduction of the INTEGRITY® secure
virtualization architecture and focus on implementation issues related
to secure virtualization solutions under the ARM architecture. Particular
emphasis will be on TrustZone technology and trade-offs between paravirtualization
and full virtualization. |
Tips and Tricks
for Debugging your ARM-based Product |
When: |
Thursday, October 22, 2009 9:00am — 9:45am |
Where: |
Santa Clara Convention Center, MCU & Tools track,
Room 209 |
Who: |
Greg Davis, Director of Engineering, Compilers |
Synopsis: |
Embedded developers spend the majority of their time
debugging code which has already been written, often times by others.
Fortunately, the debugging features built into ARM cores can make
the task much easier than on many competing cores. This talk goes
over a number of top techniques in how to get to the bottom of problems
using a modern debugger and readily available tools. Design techniques
to make debugging easier are also discussed. |
ARMing Developers
for Multicore |
When: |
Friday, October 23, 2009 1:00pm — 1:45pm |
Where: |
Santa Clara Convention Center, MCU & Tools track,
Room 209 |
Who: |
David Kleidermacher, Chief Technology Officer |
Synopsis: |
10% of embedded systems use single chip multicore
processors, with this number steadily increasing. Rapid multicore
uptake has raised alarms about the perceived difficulties in developing
and migrating software to new architectures, such as the Cortex A9
MP. Multicore software development ecosystem is maturing rapidly,
and software developers must be trained on a new set of tools and
techniques for the development, debugging, and run-time management
of multicore software on ARM cores. This class will discuss the multicore
software toolbox that developers must adopt to be successful, debunk
the myths relating to multicore software design difficulties, and
concentrate the attendee on those areas where industry investment
and improvement are truly needed. |
Green Hills Software will demonstrate in booth 319:
- Virtualized Linux running alongside real-time applications on TI
OMAP35x
- Green Hills INTEGRITY security kernel running in Trust Zone with
Linux running in Normal Zone on Freescale i.MX515
About Green Hills Software
Founded in 1982, Green Hills Software, Inc. is the largest independent
vendor of embedded development solutions. In 2008, the Green Hills
INTEGRITY-178B RTOS was the first and only operating system to be certified
by the NSA to EAL6+ High Robustness, the highest level of security
ever achieved for any software product. Our open architecture integrated
development solutions address deeply embedded, absolute security and
high-reliability applications for the military/avionics, medical, industrial,
automotive, networking, consumer and other markets that demand industry-certified
solutions. Green Hills Software is headquartered in Santa Barbara,
CA, with European headquarters in the United Kingdom. Visit Green Hills
Software at www.ghs.com.
|
North American Sales Contact:
Green Hills Software, Inc.
30 West Sola Street,
Santa Barbara, CA 93101,
Tel: 805-965-6044
Fax: 805-965-6343
Website: www.ghs.com
Email: sales@ghs.com
Media Contacts:
Green Hills Software, Inc.
Barbel French
Tel: 805-965-6044
Email: bfrench@ghs.com
|
International Sales Contact:
Green Hills Software Ltd
Fleming Business Centre
Leigh Road
Eastleigh
Hampshire SO50 9PD
UNITED KINGDOM
Tel: +44 (0)2380 649660
Fax: +44 (0)2380 649661
Email: mktg-europe@ghs.com
|